BGNLP - F-152, WHITE MIL-P-24441/12,E5827

Export as PDF
Product Identification

Product ID:F-152, WHITE MIL-P-24441/12,E5827
MSDS Date:01/01/1985
FSC:8010
NIIN:01-136-0691
MSDS Number: BGNLP

Responsible Party
INTERNATIONAL PAINT CO,(CALIFORNIA) INC
220 S LINDEN AVE
SOUTH SAN FRANCISCO, CA 94080-6411
US

Cage: 5B898

Contractor
INTERNATIONAL PAINT CO
SOUTH SAN FRANCISCO, CA 94080-6411 US

Cage: 5B898

Ingredients

N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 5.7%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 15.0%

OSHA PEL 100 PPM


2-ETHOXYETHANOL (EGEE) (SARA III)

CAS: 110-80-5

RTECS: KK8050000

Fraction By Weight: 11.0%

OSHA PEL S,200 PPM

ACGIH TLV: S, 5 PPM; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


AMIDO AMINE RESIN

Fraction By Weight: 1.6%


POLYAMIDE RESIN

Fraction By Weight: 17.0%

Hazards

Effects of Overexposure:INHAL: IRRIT OF RESP
TRACT,HEADACHE,NAUSEA,NARCOSIS. EYES: SEVERE IRRIT. SKIN: MAY CAUSE
DERMATITIS.

First Aid

First Aid:INHALATION: REMOVE INTO FRESH AIR AWAY FROM EXPOSURE. EYES:
FLUSH IMMED W/COPIOUS QUANTITIES OF RUNNING H*2O FOR AT LEAST 15
MIN. GET MEDICAL AID. SKIN: REMOVE EXCESS, THEN WASH AFFECTED AREA
W/SOAP & H*2O. REMOVE CONTAMINATED CLOTHING.

Fire Fighting

Flash Point:95F (CC)
Lower Limits:0.77
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL
Fire Fighting Procedures:SMOTHER FLAMES W/ONE OF EXTINGUISHING MEDIA.
(SEE SUPP DATA)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARKS OR OPEN FLAMES ARE PRESENT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
PROLONGED INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP
W/ABSORBENT MATERIALS.

Handling

Handling and Storage Precautions:STORE IN BUILDINGS DESIGNED,PROTECTED
FOR STORAGE OF NFPA CLASS IC FLAM LIQ. MATL EMITS IRRIT FUMES IF
SUBJECTED TO EXCESSIVE HEAT,AVOID INHAL OF VAPS
Other Precautions:RESPIRATORY PROTECTION: FILTER RESPIRATOR FOR REMOVAL
OF PARTICULATE & VAPORS OF OVERSPRAY. IN RESTRICTED VENT AREAS, USE
NIOSH/MSHA APPROVED SCBA OR IN-LINE AIR SUPPLIED RESPIRATORS.

Exposure Controls

Respiratory Protection:IN OUTDOOR OR OPEN AREAS,USE NIOSH/MSHA APPROVED
(SEE OTHER PRECAUT)
Ventilation:GENRL DILUTION/LOCAL EXHAUST TO KEEP TLV,LEL (SEE SUPP
DATA)
Protective Gloves:REQUIRED
Eye Protection:TO PROTECT AGAINST SPLASH
Other Protective Equipment:SUFFICIENT TO PREVENT ALL SKIN CONT
W/PAINT,CONTAM CLOTHES.
Supplemental Safety and Health
TRADE NAME FORMULA #EX152R66, SPECL FIRE FIGHT PROC MAY USE H*20 TO
COOL UNOPENED CONTAINERS IN VICINITY. VENT BELOW ACCEPTED LIMIT &
TO REMOVE DECOMP PRODUCTS DURING WELDING/FLAME CUTTING KEY1 :N1

Chemical Properties

Boiling Pt:B.P. Text:243F-400F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:54.9

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:CAN REACT W/STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CO,CO*2,ALDEHYDES,VARIOUS ORGANICS

Disposal

Waste Disposal Methods:DO NOT INCINERATE UNOPENED CONTAINERS. WASTE
DISPOSAL MUST BE IAW FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.